Ali-Flex 6000 Disposable Disinfecting Wipes

Disposable disinfecting wipes premoistened with stabilized sodium hypochlorite (6000 ppm) for use in the healthcare facilities. Ali-Flex^® 6000 is a ready to use disinfecting wipes with high concentration making it unbeatable when facing bacteria, viruses and fungi on most hard non porous surfaces. Get started today by requesting at no cost or obligation a demonstration.

Get Started

Ali-Flex^® 6000 is ideal during an outbreak

Accomplish intensive cleaning and disinfecting using Ali-Flex^® 6000 disinfecting wipes with Stabilized Sodium Hypochlorite at 6000 ppm. All horizontal surfaces in the patient’s room and all items within reach of patients should be cleaned and disinfect more than once per day. Staff should pay particular attention to cleaning frequently touched areas such as bed side-rails, telephones and toilets.

During an outbreak, time is of the essence. All actions are focused on stopping virus or bacteria propagation. Ali-Flex^® 6000 Disinfecting Wipes can easily help you achieve this goal.

Wettability

The surfactants in Ali-Flex^® 6000 greatly enhance the wettability of this chlorinated disinfectant and helps clean and degrease dirt on most hard non porous surfaces such as countertops, toilets, commode chairs, etc.

Bleach (6,000 ppm) Wettability of Bleach (6,000 ppm)

Competitor A Wettability of Competitor A

Competitor B Wettability of Competitor B

Ali-Flex 6000 (6,000 ppm) Wettability of Ali-Flex 6000 (6,000 ppm)

Cleaning Efficiency

Ali-Flex^® 6000 wipes are among the most resistant on the market. The cleaning power of the wipes is also very high with the greatest absorbing power.

Grease-cleaning efficacy (%)

41%

256 g/m²

2%

62 g/m²

31% (Ali-Flex Wipes) Grease-cleaning efficacy (31%)

375 g/m²

Absorbtion (g absorbed / m² textile)

Corrosivity

Ali-Flex^® 6000 contains a corrosion inhibitor. Hence, surfaces will be protected from corrosion, a phenomenon usually observed with the use of bleach. Here are several examples of corrosion onto nails submerged into different solutions for 1 week.

Water

Sodium hypochlorite (NaOCl) Corrosion onto nails submerged into Sodium hypochlorite (NaOCl)

Hydrogen peroxide (H₂O₂) (4.5%) Corrosion onto nails submerged into Hydrogen peroxide (H<sub>2</sub>O<sub>2</sub>) (4.5%)

Ali-Flex 6000 (6,000 ppm) Corrosion onto nails submerged into Ali-Flex 6000 (6,000 ppm)

Stabilité

Ali-Flex^® 6000 is certifed Certiklör, therefore it is formulated with a stabilized sodium hypochlorite making it stable for a long time. Typically over a year when stored and handled adequately. This graph below shows the stability of the Ali-Flex^® 6000 over time.